To query and control the IBS unit, use the PB0 and PB1 buttons.


PB0 button:
To enter or exit the main menu, hold the PB0 for longer than three seconds.
To move to the next menu, perform a short press of the PB0 button.

PB1 button:
To reset IBS errors, hold the PB1 button for longer than three seconds.
To select the item or display the next data item, perform a short press of the PB1 button.

Main menu:
The main menu includes the following sub menus:

• INFO
• INFOMNF
• OP
• EXIT

To move to the next submenu, press the PB0 button.
To enter the submenu, press the PB1 button.

INFO menu:
The INFO menu includes the following queries.

HW_VER	Display the hardware version
FW_VER	Display the firmware version
SW_VER	Display the software version
UB_VER	Display u-boot version
KERN_VER	Display kernel version
UNIT	Display the unit name
IP_ADDR	Display the management port IP address
EXIT	Exit to the main menu

To move to the next query, perform a short press of the PB0 button.
To display the next data item on the query, perform a short press of the PB1 button.
              
INFO MNF menu:
The INFO menu includes the following queries.

PRODUCT	Display the product name
TK_NUM	Display product tracking number
MAC MGMT	Display the management port MAC address
EXIT	Exit to the main menu

To move to the next query, perform a short press of the PB0 button.
To select a query and to display the next data item on the query, perform a short press of the PB1 button.

OP menu
The OP menu includes the following actions.

SHUTDOWN	Shut down the IBS module (the module reloads by removal and insertion of the module)
REBOOT	Reset the IBS module
DEFAULT	Set factory default parameters
EXIT	Exit to the main menu

To move to the next query, perform a short press of the PB0 button.
To display the next data item on the query, perform a short press of the PB1 button.

If you've forgotten the password and don't know the correct password in the logon prompt, perform the following steps to reset the password:

1. Open the main menu screen in the display panel:
   Press and hold PB0 for three seconds.
    
2. Move to the next submenu:
   Press PB0 and repeat until you see the OP submenu.
    
3. Select and view the options in the OP submenu:
   Press PB1 once.
    
4. Move through the options in the OP submenu. Press PB0 and repeat until you see the DEFAULT option.
    
5. Select the DEFAULT option:
   Press PB1.
   
   NOTE: When the option DEFAULT is selected, it sets the default factory parameters.
    
6. Continue to view the display panel.
   You see a row of short lines ( _ _ _ _ _ ) indicating the default factory parameters have been successfully set.
   The password is now reset to the default password.