Failed to identify the platform in use. Press the enter key to reboot the system
Last Modified: 2022-05-25 06:39:18 Etc/GMT
Affected Products
Languages:
This article is available in the following languages:
Trellix CEO, Bryan Palma, explains the critical need for security that’s always learning.
As per Gartner, "XDR is an emerging technology that can offer improved threat prevention, detection and response."
Trellix announced the establishment of the Trellix Advanced Research Center to advance global threat intelligence.
Trellix Advanced Research Center analyzes threat data on ransomware, nation-states, sectors, vectors, LotL, MITRE ATT&CK techniques, and emails.
As of May 14, 2024, Knowledge Base (KB) articles will only be published and updated in our new Trellix Thrive Knowledge space.
Log in to the Thrive Portal using your OKTA credentials and start searching the new space. Legacy KB IDs are indexed and you will be able to find them easily just by typing the legacy KB ID.
Failed to identify the platform in use. Press the enter key to reboot the system
Technical Articles ID:
KB75397
Last Modified: 2022-05-25 06:39:18 Etc/GMT Environment
Data Loss Prevention (DLP) Monitor 11.x DLP Prevent 11.x ProblemIf the DLP Prevent and Monitor 10.x or later installation USB drive is inserted on the appliance and the appliance is rebooted to try a reimage, the following error is displayed:
CauseSoftware installation media has specific hardware requirements. The software installer compares the installation requirements with the running appliance hardware information. If the installer doesn't find matching hardware or a discrepancy from the expected requirement, it raises the error message and stops installation.
Solution 1To resolve this issue, perform the following:
Solution 2For DLP Prevent or Monitor appliances, follow the instructions below to obtain the details of the error:
Contact Technical Support and provide the screenshots,
NOTE: The following lists typical errors and their resolutions for the Error: Resolution: Identify bad DIMM and reseat. If reseating doesn't resolve the problem, replace the DIMM.
Error:
Resolution: Turn hyperthreading On or Off in the BIOS depending on the numeric discrepancy values.
Error:
Resolution: Reseat the hard drive.
Affected ProductsLanguages:This article is available in the following languages: |
|