How to identify drives using MegaCli64 when troubleshooting
Last Modified: 2022-11-22 09:21:32 Etc/GMT
Affected Products
Languages:
This article is available in the following languages:
Trellix CEO, Bryan Palma, explains the critical need for security that’s always learning.
As per Gartner, "XDR is an emerging technology that can offer improved threat prevention, detection and response."
Trellix announced the establishment of the Trellix Advanced Research Center to advance global threat intelligence.
Trellix Advanced Research Center analyzes threat data on ransomware, nation-states, sectors, vectors, LotL, MITRE ATT&CK techniques, and emails.
As of May 14, 2024, Knowledge Base (KB) articles will only be published and updated in our new Trellix Thrive Knowledge space.
Log in to the Thrive Portal using your OKTA credentials and start searching the new space. Legacy KB IDs are indexed and you will be able to find them easily just by typing the legacy KB ID.
How to identify drives using MegaCli64 when troubleshooting
Technical Articles ID:
KB82020
Last Modified: 2022-11-22 09:21:32 Etc/GMT Environment
SIEM Enterprise Security Manager 11.x SummaryThis article contains the steps to identify drives using the
The Identify a failed drive:
Locate the physical drive: You need the device enclosure ID and slot number to perform these steps.
1. Locate the physical drive on the device. Type the following command and press Enter.
For example, enclosure 4 and slot 5 would be
NOTE: Running this command causes the drive to start blinking, making identification easier.
2. To stop the drive blinking, type the following command:
3. To silence the alarm, type the command below: 4. To add the drive back into the RAID, type the following command: Affected ProductsLanguages:This article is available in the following languages: |
|