Ce comportement est prévu pour les voyants de ces alimentations. Pour ces Appliances, alimentations met en œuvre la redondance à froid (économiseur d’énergie). Le voyant du PSU qui est à l’état actif reste allumé en vert et le voyant du bloc d’alimentation redondant clignote en vert. Lorsque la redondance à froid n’est pas prise en charge sur un appliance, les deux alimentations sont toujours en état actif et les voyants restent verts.
Les numéros de modèle PSU qui prennent en charge la redondance à froid (en septembre 2015 ; plus de modèles PSU peuvent prendre en charge la redondance à froid) :
Pour vérifier le numéro de modèle du alimentations :
- Arrêtez le appliance MWG.
- Déconnectez les prises électriques.
- Extrayez le alimentations du châssis appliance.
- Vérifiez les Mode nombre à la surface du alimentations :
- En tant Les numéros de modèle PSU prennent en charge la redondance à froid, la redondance à froid pris en charge sur la appliance.
- Si un seul ou aucun des numéros de modèle PSU prend en charge la redondance à froid, la redondance à froid est existant pris en charge sur le appliance.
Veuillez Si vous remplacez un ancien PSU défectueux par un modèle plus récent qui prend en charge la redondance à froid, la spécification du voyant peut changer en fonction du modèle de remplacement.
FAUT Si vous voyez l’un des problèmes suivants, contactez Support technique, car ce problème peut être dû à un défaut matériel :
- Le voyant du PSU actif clignote en vert.
- L’un des voyants clignote en vert même si le matériel ne prend pas en charge la redondance à froid.
- Les deux voyants clignotent en vert.
- Si vous êtes un utilisateur enregistré, saisissez votre ID d’utilisateur et votre mot de passe, puis cliquez sur connexion.
- Si vous n’êtes pas un utilisateur enregistré, cliquez sur Enregistrer et renseignez les champs pour que votre mot de passe et les instructions vous soient envoyés par e-mail.